How to Install Conveyor Wear Strips with Counter-Bored Bolting

Overview

This guide covers the practical steps to install conveyor wear strips with counter-bored bolting. JSLT Conveyor produces engineering plastic components in UHMWPE, HDPE, PA, POM and PTFE — full-process fabrication from raw sheet to CNC-machined parts.

Step-by-step procedure

1. Prepare conveyor frame. Clean and degrease mounting surface; check flatness within 0.5 mm/m.
2. Drill counter-bores. Counter-bore each strip at 250–400 mm spacing; use 1.5× bolt-head diameter for thermal expansion.
3. Mechanical fastening. Use M6 or M8 stainless bolts with washers; tongue-and-groove joints stay loose for expansion.
4. Verify alignment. Check parallelism and chain clearance after first run; adjust torque progressively.
5. Schedule wear inspection. Inspect at 200 hours, then quarterly; rotate or replace before residual thickness < 3 mm.

Need help?

Our engineering team reviews drawings within 24 hours. We have shipped to 80+ countries across 4 continents and hold ISO 9001 certification.